Home » Fume Extraction Cabinets » VA 600S – School Fume Extraction Cabinet

VA 600S – School Fume Extraction Cabinet VA600S

VA 600S – School Fume Extraction Cabinet

VA 600S – School Fume Extraction Cabinet

  • External -height -2120mm. Width-1000mm
  • External -depth-720mm
  • Work chamber height-955mm
  • Work chamber depth-700mm
  • The cabinet shall offer operator protection achieved through and inward flow of air through the bottom aperture below the safety glass sash.
  • The air intake velocity shall range from not less than 0,5 m/s with the sash in the closed position. 

Cabinet Details

External Section
  • The outer cabinet shall be constructed from mild steel epoxy powder coated white
  • The width of the unit shall be so that it can be passed through a standard door width and shall not exceed 720mm.
  • 2 x 16AMP power points
Internal Section
  • The inner has glass sides and back with a grade 304 stainless steel work surface.
  • No nuts and bolts shall protrude into the work area
  • The drip cup will be recessed and sealed firmly without crevices
  • The light shall be of a vapour proof incandescent type situated at the top of the cabinet where maximum light dispersant can be achieved.
  • The lighting shall provide a minimum of 800 LUX over the entire work surface.
  • The lighting shall be housed in an external housing and sealed off from the unit by means of a safety glass diffuser.
  • A silicone gasket will seal the diffuser from the light housing.
Extraction System
  • Fan to be constructed entirely from PVC with an external motor.
  • The fan shall be correctly sized according to the size and volume of the cabinet required.
  • All ductwork shall be from class 4 PVC ducting.
  • All bends and joins to be PVC sealed.
  • The ducting shall be for the sole purpose of extracting fumes and vapour from the specific fume cabinet only and no other duct shall be joined into or tapped from it.
  • The duct outlet shall be set to 1m above the highest point of the roof apex.